It’s been a busy past couple of weeks over here! We’re getting back into the swing of things after several weekends of traveling but I’d thought I’d share a sneak peek of a project I’m working on for Liv (started it nearly a month ago, actually). Wow how time flies.
Still needs a little work but I’ll be posting final pics and my steps to create soon. Happy Tuesday!
Tags: Crafty Solutions, Decorating, DIY, Nursery
Posted in Crafty Solutions, DIY, Home, Liv's Nursery, Renovating Adventures | 1 Comment »
Here’s a quick and simple way to create a crib skirt.
And a closer look at just the skirt:
As you can see, it’s actually paneling rather than a sheet with a skirted edge. This makes it easy to create, install and update for raising and lowering the mattress as your child grows.
My initial inspiration was from Young House Love’s quick no-sew tutorial – so clever! I modified it to fit this project since my thicker, quilt-like fabric needed a real hem rather than a heat bonded version.
DIY Crib Skirt
Materials: fabric, matching thread, sewing machine, scissors, 1 strip sew-on velcro(or ‘aplix’, ‘hook & loop’), 1 strip sticky velcro (this velcro has a sticky side for stick-on application)
1. First up is measuring your crib and allowing for a one inch hem on either side. A standard crib is 30×54″, but all are a bit different so it’s best to measure yours firsthand (measure the height in the frame’s highest position). Don’t forget to just measure the actual mattress frame and not the wood frame.
Our crib is 28×52″ with a 13″ height to the floor, so I cut my longest panel of fabric to 54×15″ and the two side panels to 30×15″. No need for a back panel since the crib is pushed up against the wall.
2. Sew a quick 1″ hem on the edge of each panel. Now your fabric panels should be the correct size.
3. Using the sew-on velcro, cut 1-2″ strips and pin into place every 10 inches or so along one of the longest hems (now the top hem) of each panel. Use your machine to stitch down or hand stitch into place.
4. Cut similarly sized velcro pieces from the sticky velcro strip and add to the sewn velcro pieces.
5. Now it’s time to add your new panels to the empty metal crib frame.
This is where following the photos may get tricky! Here’s a detailed breakdown…
a. With the sticky velcro attached to the sewn on velcro (see the white paper? that’s the sticky side), slip your fabric panel between the wood crib frame and metal mattress frame.
b. Take off white sticky paper
c. Attach to outside of metal frame
d. Tada! here’s how it should look!
6. Repeat for the additional panels.
7. Stick several additional velcro sections to the middle cage on the metal mattress (the part that the mattress sits on). This will allow you to move up the panels (using the velcro already sewn to the top hem) when you drop the mattress so that the fabric panels are always the perfect length.
Here’s the final bedding set:
Use any fabric for this project – bright, patterned, vibrant, custom, etc to add a splash of personality to any nursery! And don’t forget that if your chosen fabric is a simple cotton, you can do this entire project using hem tape for a no-sew option.
There’s plenty more where that came from…
More Project Nursery posts: basket liners part 2, basket liners part 1, the great glider makeover, sewing the curtains part 1, part 2, part 3, nursery fabric board, curtain fabric selection, rocking horse find, new pendant light, new sconce lighting, vintage wall art addition, changing table makeover, nursery wall striping tutorial, painted animal project, the initial inspiration board and the before picture posts.
Tags: Before & After, Crafty Solutions, Decorating, DIY, Fabric, Home, Nursery, Sewing, Tutorial
Posted in Crafty Solutions, DIY, Home, Liv's Nursery, Renovating Adventures | 4 Comments »
What happens when your family comes into town for Easter? Little projects that have been shelved for months get a bit of attention.
We’ve finally installed a much needed lighting update over the changing table! If I could move the entire sconce down and a bit to the left I would… but given the previous state of the light I’m loving the improvement!
My parents visited us for the weekend and decided to help tackle a few projects around the house, changing out the light fixture was at the top of my list.
I’ll apologize right now for the horrible lighting in the room (especially at different parts of the day, like above).
But yay for a new light! And the new sconce sits so perfectly below the little nest that Aunt Karen & Momma Eileen painted. The little birdie is Liv, and Kevin and I are the poppa and the momma flying down to the nest. So sweet.
The added butterflies (from a baby shower gift) are a neat little detail and will tie into the new mobile project. Now when Liv is on the changing table she stares up at the bright, shimmery colors.
So the hunt for the new light began a while back but I couldn’t settle on the look that I was going for. You might remember the makeover we did on the pendant in the center of the room and it brought such a wonderful, modern update to the space.
But… all of the modern sconce options were a little too modern.
Lamps Plus George Kovacs
I love these vintage industrial-style lights, perhaps to nicely balance out the modern pendant in the center of the room? But they might be better suited for the new office.
We decided that we liked the style of the swing arm sconce. We can easily move the light over the changing table or the reading area with the glider, and little toys (like the butterflies) or a mobile can hang from the arm to entertain Liv.
Why the randomly placed sconce was installed in the first place makes us curious (here’s before pics of the room). Actually, the previous owner has found this blog, Hi Patt! and there’s probably a great reason behind it, like perhaps a desk or bed used to sit below it, or perhaps it was even installed many owners ago. But by happenstance the changing table fits nicely beneath it’s current placement, so we’ve found a good use for it.
I was on the search for a sturdy, low priced version and had finally resigned to pay $100 plus when I scooped up this version for $40 from Lowes!
We modified it to hard wire straight into the existing electrical box and I left off some of the more ornate bulb decor (is that what you’d call them?) for a cleaner look.
So one big item crossed off of the nursery list. Just a few more to go!
More Project Nursery posts: basket liners part 2, basket liners part 1, the great glider makeover, sewing the curtains part 1, part 2, part 3, nursery fabric board, curtain fabric selection, rocking horse find, new pendant light, vintage wall art addition, changing table makeover, nursery wall striping tutorial, painted animal project, the initial inspiration board and the before picture posts.
Tags: Before & After, Construction, DIY, Nursery, Shopping Source Lists
Posted in DIY, Home, Liv's Nursery, Renovating Adventures | 3 Comments »