Pepper Design Blog

DIY Chevron Painter’s Tape Cloth Napkins

Hi all! Quick update – be sure you use a fabric paint for this project! My spray paint idea lasted just a few washes . Though I love how EASY it was! Another option might be line drying, but who has time for that?

Here’s another little project that I finished up this week:

I was inspired to DIY my own cloth napkins after checking out these awesome gold chevron shelf liners (which I’m now dying to try out) that I came across on Pinterest. Aren’t they perty?

I thought something for the dining room table would be equally cool and considered placemats before finally settling on cloth napkins.

It’s all in an effort to finally start creating out of those great big pin boards I have over on Pinterest! And to participate in this challenge.

When it came to narrowing down which project to tackle this week I had a hard time choosing just one, so I actually attempted three that I plan on sharing with ya’ll – this being the first!

And I’m really thrilled with the results so far.

***************************************************************************

Chevron Painter’s Tape Cloth Napkins
m

Materials: Rust-Oleum metallic gold spray paint (or fabric paint), cloth napkins (though you could use placemats or the like), painter’s tape, scissors

1. I began this project by marking off my chevron design with painter’s tape. I ended up eye balling the design making is a super simple process, though you could measure for more accuracy with a very light pencil mark to keep you on track (I would be nervous about pencil lines showing through the paint, so I’d recommend just little dots here and there if you opt for this route).

My drop cloth was also white so I apologize for the white-on-white effect, but you can see the thin edge of the napkin if you look really close. It was helpful to let the strips of the tape from the chevron design overlap onto the drop cloth to keep my napkin nice and taut for painting, too.

Here’s a close up of the painter’s tape application, you want to essentially be sure that the straight edge of the tape is in contact with the fabric with no ripped or squiggly lines.

Scissors were useful for cleaning up some of those edges where two strips of painter’s tape connected.

Another tip worth noting is that I found it really helpful to go over each line where the tape met the fabric to press down and really create a sealed off stick. You won’t want any gold bleeding through!

2. Next up was applying a thin coat of gold spray paint over the entire design (keeping the can about a foot above the napkin is the best way to create an even application without any drips – be sure that you’re spraying in wide, even motions too).

At this point in the process I was just really digging how the painter’s tape looked when spray painted – so shiny and bright! But alas a cloth napkin covered in shimmery tape would not be a useful napkin at all…

3. I let the paint dry for 20-30 minutes and then slowly began pulling up tape. It’s amazing how fast spray paint dries – no need to wait overnight which is always helpful in that instant gratification moment.

The Rust-Oleum website suggests not using a clear top coat on its metallic line so as not to dull the finish, but if you were using another paint color you could apply a final coat before pealing the tape.

I also attempted to research the ‘food safety’ of the Rust-Oleum metallic line of paint but without much luck – it’s safe to say that I wouldn’t use this cloth napkin as a lining in a bread basket and I’d definitely wipe my mouth with the other side . Same goes for babies, thankfully Liv’s not an everything-must-go-in-mouth kind of baby, but I won’t be giving her the opportunity to chew on these spray painted napkins either!

Here’s a little example of what happens if the edges of the strips of tape don’t meet just right at each intersection.

Other than a few hardly noticeable boo boos, we’re all done! So pretty.

***************************************************************************

I’m really digging the results! I haven’t tried washing yet so TBD if there’s any bleeding involved.

This was a very fast, easy project with just three basic steps, it could easily be replicated for a BIG party without a problem (so, so fast!) and I think that a set of these would look just stunning at a shower or even small wedding. Would also make a neat gift for Mother’s Day or as a housewarming present! Sort of like when I stenciled my winter cloth napkins.

One Pinterest project down and two more to share with you this week!

PS My hallway wall is Finished! and I’m so so happy with how it all turned out – I’ll be sharing all of the details manana.

Hallway Makeover: An Idea, A Color & A Challenge

What are your thoughts on wallpapered accent walls? I’m in the mood to give my hallway a good shake up and I’m thinking that one wall covered in a beautiful design would be just the way to mix things up. Plus it’s a hallway, and some how that makes me feel better about committing to an all-over pattern. Funny, I know.

Here’s where the hallway’s located in our house, and that wall that the arrow is pointing to would be my new, fun accent wall:

Originally, I began pulling images that inspired me regardless of color or pattern. The hallway leads to Liv’s room (as well as ours) so I even threw a few kids patterns in the initial inspirational mix. Here’s just a piece of what was in that folder:

1, 2, 3, 4

Please forgive the lack of sources… I am usually really really great about crediting (that the correct person of an idea receives proper credit & that an idea is easy to track down are both really important to me) but many of these images have been sitting in my Wallpaper folder for a loooong time, or sometimes I wasn’t able to find the source on Pinterest (really hope that’s fixed over there soon!). But where I do have credits I definitely included them .

So I had my big modge podge folder of ideas and I began visualizing that future space and I couldn’t shake the color blue. The current hallway is tan, and blue feels fresh and new! Here’s where that train of thought slowly wound me:

1, 2, 3, 4, 5, 6

So many choices! And so much looking. I saved my favorites and kept them close by for quick contemplating throughout the day which is a little exercise I often do when I’m super indecisive. But even after much thought into what the right pattern might be, I just couldn’t settle on one (Oh sweet indecisiveness! You and I are best friends).

See more of my journey over on Pinterest.

I eventually decided that I might have a bit more flexibility (and save some serious $) if I gave stenciling a try. Stenciled spaces can be stunning! And that basic block print has always been a look that I gravitate towards. Here are a few of my favorite patterns/inspiration with a stenciled hallway in mind:

Actually, I’m not sure all of the above are stencils. I know that that brown and white wall on the left is from here, but those blue patterns might actually be wallpaper. Either way, I was immediately inspired by the one color + white design look.

I had finally committed to an application and a vision.

Then I read about the winter edition of the Pinterest challenge (a challenge encouraging you to create one of the many items you’ve pinned) and I was set! I have my idea board, I have my project that needs tackling, and now I have my motivation to get. it. done.

The verdict? I’m going to attempt a unique wall pattern that is all my own with a roll of painter’s tape, a chair rail, a quart of black chalkboard paint and a quart of the perfect blue hallway paint. I feel like I’m setting up a magic trick…

See you on Monday!

PS In local home stores in 5 cities (Atlanta, Dallas, Sacramento, Salt Lake City and San Diego) ScotchBlue Painter’s Tape with EdgeLock is offering a buy-2 get-1 free by mail offer until March 12th.  Check it all out here.

Office Makeover + Pinterest Challenge: New Pendant!

I took on the Young House Love + Bower Power Pinterest Challenge and I’m excited to share my results!

So the room is no where near done (you can read about the progress here), but you might remember that it started as this:

Some major demo, a little bold paint and a few other fun additions later, and we’re left with this:

But back to the challenge… I wanted to make a chandelier for the guestroom ‘nook’ (aka the far end of the office with the Spanish rounded ceilings) and I decided to try my hand at a capiz shell pendant. I saved this beautiful Serena capiz chandelier by Oly in my ‘favorites’ folder a long long time ago, it’s so stunning!

Source 1 & 2

Actually, I had no idea who it was by or how crazy pricey it was (north of $1,500) until I began pinning similar styles on Pinterest.

So after much deliberation for how a not-so-fancy version could be DIYed, I set out to hunt down my main materials.

First, I needed capiz shells to line my new pendant with. I searched eBay, Amazon, online vendors… you name it. And then I remembered a shell shop near the beach in San Diego that was sure to have exactly what I was looking for. Best part? The shop is always 50% off. It’s funny, locals are on to the game, but when I stopped by earlier this week to peruse capiz shells, I overheard one of the owners tell a tourist wondering when the sale was going to end ‘Oh, you know… we never know. Maybe a few weeks?’ I wanted to whisper into the girl’s ear ‘Don’t worry, if you come back next year it will still be on’.

Nevertheless I found my best option. This chandelier was $39 and at 50% off it beat my online finds. If you’re looking for something similer though, this online chandelier or several of these capiz strands could definitely be used.

Mine on the left kind of looks like a super cheap version of the Laura Ashley chandelier on the right.

Now that I had my shells I set out to make the pendant frame. My initial thought was to hunt down a drum lampshade at a thrift shop, but I searched and searched… and then I thought that maybe I could build the frame from two tapered lampshades with the same sized bases (I was looking for about 18″). That turned out to be quite pricey because only the big box stores had them in stock. Finally, I ended up at Lowe’s searching for wire that I could shape into a circle and solder together. I realized I was taking on a huge project  when I sat there deliberating where the clamps might be put and how I could weld two perfectly straight ends into one long circle.

I decided to give HomeGoods one last shot late in the evening last night. I was hoping to find a drum lampshade period – no tapering, no fancy schmancys. Just one that I could take home, take apart and begin my project. Wow did HomeGoods come through in a big way! Not only did I find my lampshade (the Perfect shade!) but  it was coming apart at the end and I was able to get it and the base lamp for $15. Sweet.

The last piece of the pie was a basic pendant light from Lowe’s for $20. I found a similar one at Home Depot but it was $39, so that one will be going back.

Now it was time to get crafty!

*********************************************************************************

Capiz Shell Pendant Light

a
Materials: pendant lampshade, 200 capiz shells with at least one hole drilled into each – preferably pre-strung (this number will depend on the size of your shade and the length that you’d like it to hang), white thread & needle, craft glue (any glue that will dry clear), pendant kit, paint (in the same color/finish as your pendant kit) & paint brush, spray paint (in the same color/finish as your pendant kit), light bulb, x-acto knife, Goo Gone (plus rag and gloves)

{1.} I began by disassembling the lampshade so that I had just the top and bottom frames. My x-acto knife really came in handy for this one – I started with scissors but quickly realized that a thin blade would be much better at pealing the outside right off. If you’re left with a gooey mess, try wiping down the frame Goo Gone and a rag, just be sure to use gloves.

{2.} I spray painted the metal top and bottom frames a dark brown to match my bronze pendant kit.

{3.} While the paint was drying I began to take the shell chandelier apart. I kept strands of five shells strung together and restrung (with white thread and a needle) any loose or shorter strands so that I had nearly 40 strands of five shells.

{4.} Then I slowly began attaching the strands of five to the top frame of the disassembled lampshade.

{5.} When all 40 strands had been tied to the top frame, I measured the length of the shells and tied the bottom frame directly to the top frame at the same distance with thread (fishing line would work great for this step as well). I wanted a ‘top’ and ‘bottom’ to the pendant so that it really did resemble a lampshade, but you could always forgo the bottom and just let the pretty shells sway.

At this point I found it helpful to hang the lampshade from a floor lamp (removing the previous shade) so that I could work with it while it was hanging.

{6.} Now it was touch-up time. First was gluing stray shells together so that the shade had a flat look to it (totally optional), previous to gluing the shells sort of ‘spun’ on their own.

{7.} Now that the pendant was upright and hanging, the next touch-up step was to restring and retie several of the shells that had come apart or out of order. I even tied several strands directly to the bottom frame so that some stayed taught.

{8.} Finally, I used brown paint and a brush to cover up the points where the thread wrapped around the now brown lampshade frame.

{9.} Depending on the lampshade that you chose, you may be able to attach it directly to your pendant light kit and wire ‘er up! We had to make the washer in the top frame of the lampshade slightly larger to fit our pendant kit.

{10.} I posted an ad on Craigslist for a licensed electrician (a good tip is to ask them to bring a copy of their license with them right in the ad to weed out anyone that could do damage and not be accountable) to hook the pendant to our existing light switch for $25. An electrician from our neighborhood responded and rewired the new light the next morning! When that was taken care of Kevin simply attached the new wires to the existing box. You can tell from this shot that we took out two of the three arms of the pendant kit so that it wasn’t quite as long.

*********************************************************************************

Here’s a shot at night to see how the shells make the pendant sort of ‘glow’, I love that. For this photo Bodie decided he was definitely not moving.

And there you have it! I’m linking over at Katie’s, Ana’s, Erin’s, and Sherry & John’s blogs… come check out all of the great ideas.

For more Office Makeover posts, check out: organizing the bookshelves, wall collage part 1, part 2, fabric bulletin board inspiration, (new) inspiration board, new lamps, wallpapering open shelves, finding the perfect credenza, new trim, dining table-to-desk, a new desk & bookshelves, installing remnant carpeting, grasscloth wallpaper, painting the office nook, finding carpet for the office, chocolate brown wall ideas, plastering progress,  inspiration for a diy desk, back in action!, desking hunting for under $300, bookcases under $300,inspirational rooms, room layout options, demo part 1 & demo part 2.