Pepper Design Blog

Project Nursery: Crib Skirt How-To

Here’s a quick and simple way to create a crib skirt.

And a closer look at just the skirt:

As you can see, it’s actually paneling rather than a sheet with a skirted edge. This makes it easy to create, install and update for raising and lowering the mattress as your child grows.

My initial inspiration was from Young House Love’s quick no-sew tutorial – so clever! I modified it to fit this project since my thicker, quilt-like fabric needed a real hem rather than a heat bonded version.

*******************************************************************************************

DIY Crib Skirt

a
Materials: fabric, matching thread, sewing machine, scissors, 1 strip sew-on velcro(or ‘aplix’, ‘hook & loop’), 1 strip sticky velcro (this velcro has a sticky side for stick-on application)

1. First up is measuring your crib and allowing for a one inch hem on either side. A standard crib is 30×54″, but all are a bit different so it’s best to measure yours firsthand (measure the height in the frame’s highest position). Don’t forget to just measure the actual mattress frame and not the wood frame.

Our crib is 28×52″ with a 13″ height to the floor, so I cut my longest panel of fabric to 54×15″ and the two side panels to 30×15″. No need for a back panel since the crib is pushed up against the wall.

2. Sew a quick 1″ hem on the edge of each panel. Now your fabric panels should be the correct size.

3. Using the sew-on velcro, cut 1-2″ strips and pin into place every 10 inches or so along one of the longest hems (now the top hem) of each panel. Use your machine to stitch down or hand stitch into place.

4. Cut similarly sized velcro pieces from the sticky velcro strip and add to the sewn velcro pieces.

5. Now it’s time to add your new panels to the empty metal crib frame.

This is where following the photos may get tricky! Here’s a detailed breakdown…

a. With the sticky velcro attached to the sewn on velcro (see the white paper? that’s the sticky side), slip your fabric panel between the wood crib frame and metal mattress frame.

b. Take off white sticky paper

c. Attach to outside of metal frame

d. Tada! here’s how it should look!

6. Repeat for the additional panels.

So easy!

7. Stick several additional velcro sections to the middle cage on the metal mattress (the part that the mattress sits on). This will allow you to move up the panels (using the velcro already sewn to the top hem) when you drop the mattress so that the fabric panels are always the perfect length.

Here’s the final bedding set:

Use any fabric for this project – bright, patterned, vibrant, custom, etc to add a splash of personality to any nursery! And don’t forget that if your chosen fabric is a simple cotton, you can do this entire project using hem tape for a no-sew option.

There’s plenty more where that came from…
More Project Nursery posts: basket liners part 2, basket liners part 1, the great glider makeover, sewing the curtains part 1, part 2, part 3, nursery fabric board, curtain fabric selection, rocking horse find, new pendant light, new sconce lighting, vintage wall art addition, changing table makeover, nursery wall striping tutorial, painted animal project, the initial inspiration board and the before picture posts.

Project Nursery: Handmade Bedding, Finished!

Liv’s brand new bedding is ready to share! We put it all together this week and just in time to transition to naps in the crib.

Olivia can roll over now, woohoo! and napping in odd places – like our bed, on her play mat, etc – will no longer work. Of course no bumpers while sleeping, but for the pictures (and when she’s older) here’s the entire handmade set:

Liv’s great aunt Laurie sewed the bumpers from this adorable pattern (minus the ribbon trim and piping) with this nursery fabric that ties in with the color palette of the room. The reverse side of the bumpers is this modern trellis print.

It took me a few tries but this crib sheet ended up matching the rest of the coral accents perfectly!

Directions for a super simple crib skirt (more like crib paneling) that will easily shorten when we drop the height of the crib tomorrow. I whipped up this guy in about an hour.

More Project Nursery posts: basket liners part 2, basket liners part 1, the great glider makeover, sewing the curtains part 1, part 2, part 3, nursery fabric board, curtain fabric selection, rocking horse find, new pendant light, new sconce lighting, vintage wall art addition, changing table makeover, nursery wall striping tutorial, painted animal project, the initial inspiration board and the before picture posts.

Project Nursery: Basket Liners Part 2

Back with a quick update on the nursery… it’s nearly finished (as Olivia rounds her 3 month mark!) but I’ve learned that sometimes these projects just take a while (sigh). Most of what I’m waiting on has to do with little DIY projects that I need to find time to sit down and knock out.

Speaking of DIY projects, remember when I shared the changing table basket makeover? Well Kevin’s Aunt has done it again with these adorable basket liners from extra nursery fabric (pearl trellis and baltic stripe by Thibaut):

The original plain brown fabric boxes looked fine, they blended in well with the Ikea Expedit bookcase and held all of Liv’s fun toys and stuffies. But there’s just something special about these colorful liners that add a little ‘pop’ to the bookcase! And I love that it ties into the rest of the room in such a subtle way that it doesn’t appear matchy-matchy.

As far as storage goes, we keep her bath time toys in that water-friendly green pail, her snuggies and stuffies tucked away in one of the baskets while rattlers and other noise makers go in the other – that green lidded box on the lowest shelf holds all of her keepsake pieces such as her birth announcement, cards from family and her footprints from the hospital (having it easily accessible means I don’t forget to store away important items). Her library really grew when books were substituted for cards at one of my baby showers. Instead of signing a card with their gift, guests were asked to bring a book with a special message written inside!

To create a really simple basket liner pattern, check out this post. Thanks, Aunt Laurie!

As for that bookcase, it’s a piece that I spruced up by adding a fabric backing for this design show last year, where I presented a few fabric remnant ideas for quick decor updates.

The step-by-step for adding the backing to the backless Expedit bookshelf is posted here.

That beautiful fabric is Flower Field Sand Dollar, I noticed that Calico Corners carries it in pink now too.

Working on Liv’s mobile now! I’m working on a felted project that will tie in perfectly with the theme… but that’s all I can share for now .

More Project Nursery posts: basket liners part 1, the great glider makeover, sewing the curtains part 1, part 2, part 3, nursery fabric board, curtain fabric selection, rocking horse find, new pendant light, vintage wall art addition, changing table makeover, nursery wall striping tutorial, painted animal project, the initial inspiration board and the before picture posts.