Pepper Design Blog

Office Makeover: New Custom Bulletin Boards!

Back with the how-to for the office’s new custom bulletin boards. You might remember the inspiration from this post and how I was really wanting to incorporate a colorful fabric into the otherwise neutral space (especially with the tan grasscloth wall, natural wood bookshelf and desk, and brown & white office organizing supplies).

My solution was a teal Thomas Paul fabric in a fun print!

That image was before the boards were covered with inspirational images, photos of the family and other general mementos (such as invites, birth announcements, etc) that in general make me smile. A happy office is a productive and comfortable workspace.

PS that’s a new Craigslist office chair find — I love the casters and the wooden frame, though she needs a good reupholstering!

I’ll admit that it looks a bit crowded on camera but up close it’s the perfect mix of whimsical inspiration and practical projects that I’m hoping to tackle. I’m sure it will get less and less ‘pretty’ as the days go on and it gets stacked with calendars, to-do lists, excel spreadsheets and the like.

The best part is that this is the view from where I sit every day:

I had set aside enough photos of Liv to cover five of these boards, but I had to edit to several of my absolute favorites {how cute is that sweet baby!}.

**************************************************************************

Custom Fabric Bulletin Board
m

Materials: board cut to size (this will be the back of the bulletin board, I used dry erase board from Lowe’s because it was light weight), wood molding, fabric, cork (I found upcycled cork placemats from Goodwill and similar sheets at Joann’s to fill in the gaps–the thicker the better!), spray adhesive or white glue, miter box (or another tool for cutting 45 degree angles), spray paint, glue gun, nail gun, caulk and a caulking gun, rag, small bucket of water

{1.} I began by building the frames for my custom bulletin board. Using fabricated molding from Lowe’s, we measured the desired length out and cut apart the molding into four pieces per frame. Then a 45 degree angle was cut into each end so that when placed together they created a rectangle (thanks, Andrew!). A miter box is helpful for doing this by hand, but if you have access to a table saw that’s your quickest cut.

{2.} Next each piece was spray painted with several coats of matte brown paint (for best results spray at least 8″ from the wood and rely on multiple coats for the best finish. One close-up coat will definitely result in dripping and bubbles).

{3.} While the frame edges dry, let’s focus on the bulletin board itself. Choose a sturdy backing for your bulletin board and have it cut to size (Lowe’s helped me with this one and I ended up using a light weight dry erase board that they sell in sheets – though a stronger material might have prevented a bit of curving).

{4.} Use a spray adhesive or white glue (such as Elmers) to attach your cork to the board backing. I used an x-acto knife to help me cut apart my cork to completely cover the board.

{5.} Cut your fabric to size allowing for at least a 2″ hem on all edges. Flip board over onto fabric so that the board and fabric are facing down. While pulling taut, glue gun fabric edges to back of board to secure fabric in place (I first tried this with a spray adhesive but it wasn’t strong enough to keep wrinkles at bay). These pictures disappeared from my camera card! So here’s a recap of my formula for attaching the fabric:

{6.} Now it’s time to assemble the bulletin board. Attach each premade edge of the frame directly to the board with a strong adhesive (we used an adhesive that fit a standard caulking gun but you could even use a glue gun here).

{7.} The adhesive keeps your edges in place while you secure the frame to the board with a nail gun. Be sure to flip the board over and use a hammer to flatten all of the pointy protruding nails.

{8.} Flipping the bulletin board back over, apply caulk to your new nail holes and all corner gaps. Wipe any excess with a wet rag (keep a small container of water near by so you can keeping dipping as you wipe).

Here’s a tip for adding a new container of caulk or sealant to a caulking gun: always cut the tip at an angle with a strong utility knife, and be sure to cut away from your body.

{9.} Wait until the caulk dries and touch up any spots with paint (I simply lined the inside of the bulletin board with newspaper and spray painted over the spots needing a touch up, but you could use a brush as well). You might have a few holes still show through a bit, but it’s not obvious unless you’re verrry close.

You’re probably wondering why you couldn’t skip the first painting step and I considered this, but I was too nervous of covering the beautiful fabric with accidental spray paint leaks and found that just touching up at the stage (since the fabric is now in place) was easiest.

Now the bulletin boards are ready to be hung! I opted to lean mine up against the wall rather than hanging above the desk:

**************************************************************************

Yay for one more project crossed off of the list! And I really do love how they turned out.

For more Office Makeover posts, check out: handmade capiz pendant light, organizing the bookshelves, wall collage part 1, part 2, fabric bulletin board inspiration, (new) inspiration board, new lamps, wallpapering open shelves, finding the perfect credenza, new trim, dining table-to-desk, a new desk & bookshelves, installing remnant carpeting, grasscloth wallpaper, painting the office nook, finding carpet for the office, chocolate brown wall ideas, plastering progress,  inspiration for a diy desk, back in action!, desking hunting for under $300, bookcases under $300,inspirational rooms, room layout options, demo part 1 & demo part 2.

Decorating for Fall: More with Fall Leaves!

There are three trees in our neighborhood that change colors during the fall. Three. In the entire neighborhood. When Liv and I go for walks I stare longingly up at the branches willing those crisp green leaves to take on their yellow and orange shades.

When my mother-in-law was in town this past weekend it happened! Not only did the trees change color but they shed a good portion of those beautiful leaves to the ground. When she came back from taking Liv for a stroll she brought with her a huge bundle of these:

Naturally I pressed and framed them. I don’t know how long they’ll last but just maybe I can preserve them for the future. Waaaaay better than the fake ones I used over here.

Here they are sitting on a shelf in our dining room:

I first attempted to frame without flattening and the result was a bit sloppy, so my next approach was to organize them on my white sheet of construction paper, attach to paper with a double sided adhesive and then smoosh between two big heavy books.

Then I added the construction paper back into the frame and sealed it up.

I love the colors, especially against the brownish red frame.

I had quite a few leaves left over so I made a very simple garland by stringing the leaves through twine. Here they are on the other bookcase:

I think it’s a nice little fall detail, especially when casually strung up like they are here.

The process to make this guy was so simple and so quick: poke two holes in each leaf and string through – up and over for the first leaf, down and under for the next.

Just like you’re sewing a simple stitch.

Until you’ve finished the whole lot:

They’re perfect for the upcoming Thanksgiving holiday and I love how they bring just a little bit of the outdoors in!

Office Makeover + Pinterest Challenge: New Pendant!

I took on the Young House Love + Bower Power Pinterest Challenge and I’m excited to share my results!

So the room is no where near done (you can read about the progress here), but you might remember that it started as this:

Some major demo, a little bold paint and a few other fun additions later, and we’re left with this:

But back to the challenge… I wanted to make a chandelier for the guestroom ‘nook’ (aka the far end of the office with the Spanish rounded ceilings) and I decided to try my hand at a capiz shell pendant. I saved this beautiful Serena capiz chandelier by Oly in my ‘favorites’ folder a long long time ago, it’s so stunning!

Source 1 & 2

Actually, I had no idea who it was by or how crazy pricey it was (north of $1,500) until I began pinning similar styles on Pinterest.

So after much deliberation for how a not-so-fancy version could be DIYed, I set out to hunt down my main materials.

First, I needed capiz shells to line my new pendant with. I searched eBay, Amazon, online vendors… you name it. And then I remembered a shell shop near the beach in San Diego that was sure to have exactly what I was looking for. Best part? The shop is always 50% off. It’s funny, locals are on to the game, but when I stopped by earlier this week to peruse capiz shells, I overheard one of the owners tell a tourist wondering when the sale was going to end ‘Oh, you know… we never know. Maybe a few weeks?’ I wanted to whisper into the girl’s ear ‘Don’t worry, if you come back next year it will still be on’.

Nevertheless I found my best option. This chandelier was $39 and at 50% off it beat my online finds. If you’re looking for something similer though, this online chandelier or several of these capiz strands could definitely be used.

Mine on the left kind of looks like a super cheap version of the Laura Ashley chandelier on the right.

Now that I had my shells I set out to make the pendant frame. My initial thought was to hunt down a drum lampshade at a thrift shop, but I searched and searched… and then I thought that maybe I could build the frame from two tapered lampshades with the same sized bases (I was looking for about 18″). That turned out to be quite pricey because only the big box stores had them in stock. Finally, I ended up at Lowe’s searching for wire that I could shape into a circle and solder together. I realized I was taking on a huge project  when I sat there deliberating where the clamps might be put and how I could weld two perfectly straight ends into one long circle.

I decided to give HomeGoods one last shot late in the evening last night. I was hoping to find a drum lampshade period – no tapering, no fancy schmancys. Just one that I could take home, take apart and begin my project. Wow did HomeGoods come through in a big way! Not only did I find my lampshade (the Perfect shade!) but  it was coming apart at the end and I was able to get it and the base lamp for $15. Sweet.

The last piece of the pie was a basic pendant light from Lowe’s for $20. I found a similar one at Home Depot but it was $39, so that one will be going back.

Now it was time to get crafty!

*********************************************************************************

Capiz Shell Pendant Light

a
Materials: pendant lampshade, 200 capiz shells with at least one hole drilled into each – preferably pre-strung (this number will depend on the size of your shade and the length that you’d like it to hang), white thread & needle, craft glue (any glue that will dry clear), pendant kit, paint (in the same color/finish as your pendant kit) & paint brush, spray paint (in the same color/finish as your pendant kit), light bulb, x-acto knife, Goo Gone (plus rag and gloves)

{1.} I began by disassembling the lampshade so that I had just the top and bottom frames. My x-acto knife really came in handy for this one – I started with scissors but quickly realized that a thin blade would be much better at pealing the outside right off. If you’re left with a gooey mess, try wiping down the frame Goo Gone and a rag, just be sure to use gloves.

{2.} I spray painted the metal top and bottom frames a dark brown to match my bronze pendant kit.

{3.} While the paint was drying I began to take the shell chandelier apart. I kept strands of five shells strung together and restrung (with white thread and a needle) any loose or shorter strands so that I had nearly 40 strands of five shells.

{4.} Then I slowly began attaching the strands of five to the top frame of the disassembled lampshade.

{5.} When all 40 strands had been tied to the top frame, I measured the length of the shells and tied the bottom frame directly to the top frame at the same distance with thread (fishing line would work great for this step as well). I wanted a ‘top’ and ‘bottom’ to the pendant so that it really did resemble a lampshade, but you could always forgo the bottom and just let the pretty shells sway.

At this point I found it helpful to hang the lampshade from a floor lamp (removing the previous shade) so that I could work with it while it was hanging.

{6.} Now it was touch-up time. First was gluing stray shells together so that the shade had a flat look to it (totally optional), previous to gluing the shells sort of ‘spun’ on their own.

{7.} Now that the pendant was upright and hanging, the next touch-up step was to restring and retie several of the shells that had come apart or out of order. I even tied several strands directly to the bottom frame so that some stayed taught.

{8.} Finally, I used brown paint and a brush to cover up the points where the thread wrapped around the now brown lampshade frame.

{9.} Depending on the lampshade that you chose, you may be able to attach it directly to your pendant light kit and wire ‘er up! We had to make the washer in the top frame of the lampshade slightly larger to fit our pendant kit.

{10.} I posted an ad on Craigslist for a licensed electrician (a good tip is to ask them to bring a copy of their license with them right in the ad to weed out anyone that could do damage and not be accountable) to hook the pendant to our existing light switch for $25. An electrician from our neighborhood responded and rewired the new light the next morning! When that was taken care of Kevin simply attached the new wires to the existing box. You can tell from this shot that we took out two of the three arms of the pendant kit so that it wasn’t quite as long.

*********************************************************************************

Here’s a shot at night to see how the shells make the pendant sort of ‘glow’, I love that. For this photo Bodie decided he was definitely not moving.

And there you have it! I’m linking over at Katie’s, Ana’s, Erin’s, and Sherry & John’s blogs… come check out all of the great ideas.

For more Office Makeover posts, check out: organizing the bookshelves, wall collage part 1, part 2, fabric bulletin board inspiration, (new) inspiration board, new lamps, wallpapering open shelves, finding the perfect credenza, new trim, dining table-to-desk, a new desk & bookshelves, installing remnant carpeting, grasscloth wallpaper, painting the office nook, finding carpet for the office, chocolate brown wall ideas, plastering progress,  inspiration for a diy desk, back in action!, desking hunting for under $300, bookcases under $300,inspirational rooms, room layout options, demo part 1 & demo part 2.