Pepper Design Blog

Jazzing Up Ikea Curtains

When I was working on the inspiration board for our bedroom I had my heart pretty set on simple drop cloth white curtains. What could be a cheaper material and a more classic look than basic white canvas?

Ahhh if they only sold basic white canvas drop cloths. I checked five hardware stores (which sort of takes away from the low-cost mission) and came up with tan/natural options only. I even considered a) ordering online and paying to have the canvas shipped to me or b) purchasing canvas fabric from the local discount fabric shop and hemming them myself. Both seemed too time consuming for what was supposed to be a basic project…

Thankfully a recent trip to Ikea revealed white panels for $14.99/pair. Perfect! Drop cloth canvases from Lowes were roughly the same price for a similar amount of material.

Drop cloth curtains would require curtain clips, so I modified my Ikea panels to create a look slightly more jazzed up look by trimming each tab off of the top of the curtains.

Then up went the rods and bamboo roman shades!

I like to hang rods slightly higher than the window frame to add a little drama.

Each curtain panel received a set of curtain clips (you can find these at your local home improvement store or home decor store) and a very thorough ironing.

I wanted the curtains to pool a bit at the bottom so I didn’t bother hemming them (that’s not a pretty pool job above, but you get the idea…). A quick application of iron-on hem tape would take care of raising the length if need be.

And there they are! Not much to holler about but a clean, basic, affordable solution to what were empty and boring windows. It also has always bothered me that the window behind the bedframe was so much smaller than the actual headboard, now the curtains help to balance out the proportions.

One more project for the master bedroom down!

Feathering the Nest for Christmas

Our Christmas tree is up and the theme is color, color, color from its tip top down to its toes. But despite my love of firetruck red and lime green around this time of the year, there has always been something pure and classic about white Christmas decor that I’m continuously drawn too.

When I found trees similar to these feathered friends for $25 each I decided that this is a DIY project I can tackle in an evening. That day I stopped by the craft store for feathers, a small container of Elmer’s glue and poster board – totaling in at less than $5 for the whole bunch.

*********************************************************************************************

{Feathered Christmas Trees}

a
Materials:
*White poster board
*Stapler
*White feathers (Two .25oz bags worked out to be the perfect amount for me)
*Elmer’s glue (or similar)

1. Cut the poster board into two cone shapes – one small and one large. The easiest way to do this is to roll the paper into your desired cone size and then cut the base and extra corners so that it sits flat. Staple edges together to hold the cone shape.

2. Begin at the base of the cone (to cover up the tops of the feathers as you go) and line paper with a small amount of glue. Lie feathers flat (facing down) against the cone so that just the furry sides absorb a small amount of glue. Work your way up the cone and continue layering until the entire cone is covered. I went back and forth between the small and large cone gluing a layer on each and letting one dry as I was working on the other.

3. Let dry and display. Easy peasy!

I love how simple and classic they look on our vintage sideboard next to Bodie’s black & white puppy picture and a cylinder vase filled with dried white beans and glittery turquoise ornaments.

And can you believe that Christmas is only 12 days away?

*********************************************************************************************

Project Nursery: Stripe it Out

This past weekend was busy busy! Anxious to catch up on some much-needed nursery time, we dove head first into the room and began ripping out everything that needed replacing (read more about that and see the before pictures here). Out went the built-in cabinets, out went the light fixtures and off with the old, cracked window moldings.

While the inspiration board for the nursery isn’t quite finished yet… we knew that we wanted a bright and airy backdrop for the entire room and decided that the walls would be painted a light light neutral.

Hopefully these paint swatches don’t show up as too pink or too yellow on your computer screen – we were down to five neutrals when we decided that with the type of light that comes through our North-facing windows, the above off-white-with-a-tinge-of-tan should do the trick (for reference, we chose Believable Buff at 50% by Sherwin Williams). It was one huge lesson in never judging a paint by it’s swatch in the fluorescent lights of a hardware store, I probably drove back and forth ten times!

To keep the walls from becoming to bland, we thought it would be fun to add one striped accent wall along the most prominent stretch of the room:

Inspiration: Samantha Pynn, BHG, DecorPad and below, The Lettered Cottage

Keeping it soft and subtle was key here – we were working in the world of whites & tans and this is a close example to what I had in mind:

And so the room received a full covering in Believable Buff at 50%, and the stripes were filled in with Believable Buff at 35% (odd, I know, but I kept playing with the right blend at the Home Depot counter and I’m sure the paint man was going crazy).

Too keep the fumes from baby and me, Kevin was a sport about painting the entire room. Then he let my Mom and I stripe out the one wall once the room had been well ventilated, then he painted again.

I used tutorials from Centsational Girl and Young House Love (great suggestions!) to help guide the project, but ultimately walked away with a few tips and tricks – as well as lessons learned – of my own.

*********************************************************************************************

{DIY: Striping Walls}

a
Materials:
*A gallon of paint to cover the room (or two quarts if you’re tackling just one wall)
*A quart of paint in the contrasting color (one quart per striped wall is a good estimate)
*Level
*Painting tape (we used Frog Tape)
*Ruler/measuring tape/L-square ruler
*Pencil
*2 people (very helpful!)

1. Paint the entire wall your base color: for us this was the slightly darker of the two shades (since the rest of the room was also the darker color). Let dry for several days to avoid pulling up paint when you attempt to remove the tape in the last step.

2. Take time to pencil your lines: Measure your wall from ceiling to floor and divide the entire wall by the number of stripes you’d like to paint. Ours was 100″ high, so we broke the wall into ten 10″ stripes. While many of the tutorials I read suggested using a measuring tape to mark out your lines in various positions on the wall, I found that ultimately a level and an L-square ruler worked best for our old house. Because the walls and ceilings weren’t perfectly level/straight to begin with, we initially measured out the wall in 10″ increments and then used our level to connect the dots across the wall with a pencil (without the level, our lines began to look like they were sloping upwards).

2. Tape: Tape off your pencil lines by taping along the top of one line and then the bottom of the next (so that you ultimately end up with full 10″ stripes in each alternating color). We had heard great things about Frog Tape and gave it a shot, we definitely liked the results.

5. Seal the tape edges: This is a critical step and will save you much heartache! Seal the edge of the tape that marks off the new stripe color by painting it with a quick application of the current or base wall color (purchase a sample size of your current wall color if you didn’t start from step 1). Now, when a bit of paint bleeds through the tape, it will be the current wall color and not your the color of your new stripes – which would leave a jagged line.

6. Fill in your stripes: Apply two coats of the second stripe paint color between the wider tape lines.

7. Peel off tape: Next crucial step! Remove the tape shortly after applying the second coat so that the paint is still decently wet. If you wait until the paint is dry, the tape is more likely to pull up the below layers of paint and cause peeling and rough lines.

Perfect back drop for baby’s room – I love how the stripes are soft and neutral, it’s a nice accent but not overwhelming. Now on to the windows, light fixtures, floors and inspiration board!